Port of Valencia
SEDNA Passenger Boarding Bridge
THE PROJECTWhen acciona Trasmediterránea increased its fleet in the year 2001 with the incorporation of the superferries Sorolla and Fortuny and the highspeed catamaran Milenium, ADELTE received an order from this leading Ferry operator to install various passenger boarding bridges within a limited amount of time for its terminals in Spain. in Valencia, acciona Trasmediterránea opened a new terminal building that year to serve the Balearic islands routes and to service calling-in cruise ships. ADELTE was again asked to design and install a versatile unit, able to fit the embarkation and disembarkation needs of both ferry and cruise vessels.
TECHNICAL FEATURESMovable passenger boarding bridge with a fixed entrance tunnel from the terminal to the rear gantry and a longitudinal tunnel along the seaside, providing a Z-shaped bridge. The tunnel is 'climalit' glazed and the gantry is electromechanically adjustable. a boarding telescopic pod covered platform stretches from the front movable cabin to provide direct access to acciona Trasmediterránea's ferry vessels' entrance. The bridge is equipped with an electromechanical drive system in order to move the supporting structure along the wharf. This system consists of bogies supported on rails. Due to its 5 metre height, different kinds of vehicles are able to easily pass underneath the construction.
Incheon, South Korea
Taipei & Keelung, Taiwan